dfbf

I-1310nm/1550nm i-Infrared Laser-3mW

I-1310nm/1550nm i-Infrared Laser-3mW

Umzekelo: BDT-1310-1550-MW3

Inkcazelo emfutshane:

1310nm ILaser-MW3

Ubude bobude: 1310nm/1550nm

Amandla emveliso:0 ~ 3mW

Isidibanisi sefiber optical: SMA905

Umbane wokubonelela: 230 VAC 50 - 60 Hz (115 VAC ngokuzithandela)

Ineenzuzo zobukhulu obuncinci, ubunzima obulula, ukusebenza okuthembekileyo, ukusetyenziswa kwamandla aphantsi, ukusebenza kakuhle okuphezulu kunye nobomi obude bokusebenza, kwaye isetyenziswa kakhulu kwishishini, ukusukela, kwirada kunye nezinye iindawo.

 


  • f614effe
  • 6dac49b1
  • 46bbb79b
  • 374a78c3

IParameter yobuGcisa

Iiparamitha

Ubungakanani

Iithegi zeMveliso

I-laser ye-1310nm ye-infrared ithatha i-LD engeniswe ngaphandle, eneempawu zokukhanya okuphezulu, i-modulation frequency frequency kunye ne-spectrum ecocekileyo.Ilungele uphando lwezenzululwazi, amayeza, unxibelelwano nge-laser, ukukhanya kunye nezinye iinkalo.

Umthombo wokukhanya ulawulwa yisikrini sokuchukumisa, esinokuseta ngokulula iiparitha ezifana namandla okuphuma, ukuphindaphinda, kunye nomjikelo womsebenzi.Ngexesha elifanayo, ukwenzela ukuba kube lula ukusetyenziswa, umthombo wokukhanya unika kwakhona i-interface yolawulo lwangaphandle.Abathengi banokusebenzisa i-port ye-TTL yokumodareyitha ukuvumelanisa ukukhanya kunye nokungabikho kwexesha le-laser kunye nomqondiso wokulawula wangaphandle.Ukutshintsha okuphambili kwipaneli yangaphambili iqinisekisa ukuba ngabasebenzi abagunyazisiweyo kuphela abanokufikelela kumthombo wokukhanya.

Ukongeza, kwizicelo ezahlukeneyo, sinokubonelela ngeenkonzo ezilungiselelwe ngokwezifiso ezifana ne-divergence angle kunye nendlela yokulawula.Ngeenkcukacha, nceda uqhagamshelane neenjineli zethu.


  • Ngaphambili:
  • Okulandelayo:

  • Umzekelo BDT-1310-1550-MW3
    Iiparamitha zamehlo
    Ubude bamaza 1310nm/1550nm
    Ukutenxa kobude obungamaza +/-10nm
    Amandla emveliso 0~3mW
    Uzinzo lwamandla 5%
    IFayibha Core Diameter (um) 105um
    Ilensi edibeneyo inokwenzeka
    IFiber Numerical Aperture 0.22
    Isidibanisi sefiber optical SMA905
    Ubude beFayibha 3.0m
    Iiparamitha zombane
    Umboniso wamandla Ipesenti yamandla
    Ukuseta ukuchaneka 0.10%
    Uluhlu lohlengahlengiso ~0% ukuya kwi-100%
    Unikezelo lombane 230 VAC 50 – 60 Hz (115 VAC ngokuzithandela)
    Ukumodareyitha kweTTL Inqanaba eliphezulu = i-laser, inqanaba eliphantsi = i-laser off;edadayo = inqanaba eliphezulu Ubuninzi bomodulation frequency 1Mhz
    Indlela yokupholisa ukupholisa umoya
    Indawo yokusebenza
    Imilinganiselo (mm) Jonga "Umzobo weSistim yolwandlalo"
    Ubushushu bokusebenza 0 ukuya 40 °C(Ubushushu obuphezulu okanye obuphantsi bokusebenza bungenziwa ngokwezifiso)
    Ubushushu bokugcina -20 ukuya kuma-80 °C
    Izinto ozilindile emhlabane 10000 iyure
    Iwaranti 1 unyaka

    1310nm ILaser-MW3.3